The ocean shipping procedure of U.S. imports bottle jar from China

 

The ocean shipping procedure of U.S. imports bottle jar from China

 

In cross-border trade, there will be imports and exports of goods. American importers who want to import Chinese goods into the United States have to arrange international transportation.

 

Transnational transportation:

 

Air or sea transportation can be arranged. This depends on the quantity and weight of the goods. The sea transportation cycle is long, but the transportation price is relatively low. The air transportation cycle is short, but the price is more expensive. It should be selected according to different needs.

 

 

Container introduction: International ocean shipment is carried out through containers, which are generally divided into three types of containers: 20GP, 40GP, and 40HQ. The space they hold is also different, 20gp can hold 28cbm of goods, 40gp can hold 58cbm of goods, and 40hq can hold 65cbm of goods. If goods capacity is less than 20cbm, you can choose to ship with friends who have common needs; the cost can be understood as the AA shared type, which is what we usually call shipped out in bulk.

So if you want to import a batch of goods from China to the United States, you need to understand what processes, what qualifications are required, and what you need to pay attention to.

Next, I will tell you about the knowledge:

1. Confirm the trade terms and US importers’ receipts

The shipper firstly confirms the purchased goods, confirms the trade contract with the Chinese supplier and confirms what the trade terms are. Common trade terms are EXW and FOB.

EXW means that the Chinese factory only takes care of the delivery and does not arrange the ocean transportation. The consignee needs to arrange the import transportation and customs declaration,

FOB means that the Chinese factory will deliver the goods to the warehouse in China designated by the American importer, and the domestic consignee’s freight forwarder will arrange vessel booking and custom application.

2. Declaring ISF and AMS

What is ISF?

ISF declaration is the abbreviation of Importer Security Filing, namely “import security declaration”, also called anti-terrorism declaration. It is a requirement of the U.S. Customs for U.S. importers. This is a thing created by the U.S. Customs and Border Protection (CBP) to strengthen U.S. security after the “911 incident”. This is unique to the U.S. A declaration whose purpose is to improve safety supervision.

 

ISF declaration method: ISF declaration can be declared by the seller or the buyer. If the buyer declares on behalf of the buyer, then the buyer needs to declare through the freight forwarder, and the consignee needs to sign the POA authorization letter with the US agent of the freight forwarder. The freight forwarder will send the US agent information to the consignee, and will also notify the agent that it will also actively contact the consignee, and only after the POA is signed, the goods can be shipped from the port of departure.

ISF penalty: a fine of five thousand US dollars normally.

ISF declaration time limit: The electronic declaration data must be sent to the U.S. customs through the AMS or ABI system 24 hours before the goods are loaded on the ship. In terms of ISF declaration operations, importers can entrust their trusted overseas agents to declare on their behalf.

AMS declaration 

AMS is the abbreviation of the American Warehouse Receipt System.

During the transaction process, they need to be reported to the U.S. Customs through the AMS system.

The simple distinction is: AMS declarations are mainly the information in the bill of lading, and freight forwarders are more controllable during declarations.

The ISF declaration is mainly an entity in the supply chain. Part of the information is in the buyer and part of the information is in the seller, so the buyer usually declares.

3. The import operation process is detailed as follows: 　　

1). Obtain the necessary documents. 　　

The shipper provides the bill of lading, invoice and packing list of the goods of foreign customers, and if necessary, a non-wood packaging certificate or fumigation certificate is required. Provide import documents including contract (general trade) to freight forwarder after receipt.

2). Document exchanges 　　

Freight forwarder checks out the cargo carrier, shipping agent and place of document exchanges. And take the bill of lading to the shipping company to exchange the bill of lading. then contact the station and confirm the cost of carrying the container, the cost of removing the container, the cost of loading, and the return fee.　　

3). import commodity inspection 　　

Through the customs commodity code book can confirm whether the goods need commodity inspection. Imported goods that need to be inspected in advance must go to the Commodity Inspection Bureau for commodity inspection. Commodity inspection also needs to be carried out as soon as possible, generally after the commodity inspection.

4). Import customs clearance 　　

Forwarders make correct declaration data based on the customs declaration data provided by the shipper and the container number and seal provided by the yard or trailer. The declaration materials include: invoice, packing list, bill of lading returned from shipping company, customs declaration letter of attorney, import goods declaration form, commodity inspection, animal and plant inspection, etc.　　

5). Clearance by customs 　　

Hand over the duty payment slip to the freight forwarder, and the freight forwarder will contact the customs for clearance. That is, one time release.

6). Picking up the container 　　

After completing the deposit with the documents and materials and authorized by the shipping agent management department, go to the import container post to go through the procedures for picking up the container, receive the container equipment handover form, and check whether the content is correct. After the consignee has unpacked the imported goods, the empty container will be returned to the return location. After the empty container is returned to the yard, the consignee must promptly present the pledge voucher to go to the container management department to settle the container fee.　　

7). Delivery 　　

The freight forwarder or the consignee should contact the trailer to pick up the goods at the shipping agency’s wharf and station with the documents and information. The mortgager goes to the container management department to handle the container mortgage settlement procedures.

Founded in 2011, Canvard Packaging has 10 years of export experience and can assist customers in safely completing international transportation processes.

Donot miss 7 types of plastic material when selecting high-quality container packaging

Nowadays, there are various types of plastic bottles on the market. Consumers are dazzled. Some customers worry about the compatibility of bottles for their products, and some customers worry about the environmental protection of plastic bottles.

As the company’s sense of social responsibility increases, Many brands require or only accept recyclable plastic bottle packaging, so how to choose a high-quality plastic bottle that suits you is worth studying. Now I will provide you with several methods for your reference.

 

what does these number means?

In the first step, we first look at the material of the bottle. The material is very particular. Different materials can hold different products, and there are certain compatibility issues. Usually there is a label framed by a triangle symbol on the bottom of the bottle. The triangle formed by the three arrows means that the material of the bottle is ‘recyclable’, but this does not mean that it can be reused. Each bottle has its corresponding plastic bottle material type label, which is 1, 2, 3, 4, 5, 6, 7, and each number represents a type of material. If the product is made of several different materials, then what is marked is its main material. Identifying different numbers is to facilitate classification and recycling, and has nothing to do with the “safety” of the bottle. So what does this number mean?

 

Meaning of number 1, PET

The number 1 in the triangle at the bottom of the plastic bottle: PET polyethylene terephthalate, commonly used for mineral water bottles, carbonated beverage bottles, shampoo bottles, shower gel bottles, alcohol disinfectant bottles, etc. It is well known that beverage bottles made of this material cannot be filled with hot water. They are only suitable for warm or frozen drinks. The bottle is easily deformed if it is filled with high-temperature liquid, and releases harmful substances to the human body. It is not suitable Long-term repeated use or containing acidic substances.

 

Meaning of number 2, HDPE

The number 2 in the triangle at the bottom of the plastic bottle: HDPE high-density polyethylene, common used for medicine bottles, cleaning bottles, laundry detergent bottles, body wash bottles, shampoo bottles, disinfection bottles, plastic bags, etc.,It can withstand 110 ℃ high temperature. Plastic containers containing cleaning and bath products can be used after careful cleaning, but they are often not easy to clean and leave residues, thus becoming a breeding ground for bacteria, so it is not recommended to use them repeatedly for a long time.

 

Meaning of number 3, PVC

The number 3 in the triangle at the bottom of the plastic bottle: PVC polyvinyl chloride, common used for raincoats, building materials, plastic film, plastic boxes, pesticide bottles, etc., this kind of material has excellent plasticity and is cheap, so it is more commonly used. However, their heat-resistant temperature is low, and harmful substances may be released during high-temperature decomposition. They are even released during the manufacturing process. After toxic substances enter the human body with food, they may cause breast cancer, birth defects and other diseases in newborns. At present, containers of this material have been less used for packaging food.

 

Meaning of number 4, LDPE

The number 4 in the triangle at the bottom of the plastic bottle: LDPE polyethylene low-density polyethylene, common used for cling film, etc. Do not wrap the cling film on the surface of the food and put it into the microwave because its heat resistance is not strong. Usually, qualified PE cling film is encountered when the temperature exceeds 110°C, hot melting will occur, leaving some plastic preparations that cannot be decomposed by the human body. In addition, when food is wrapped with plastic wrap and heated, the fat in the food can easily dissolve harmful substances in the plastic wrap. Therefore, when food is put into the microwave oven, the wrapped plastic wrap must be removed first.

 

Meaning of number 5, PP

The number 5 in the triangle at the bottom of the plastic bottle: PP polypropylene, common ly used for soy milk bottles, yogurt bottles, juice drink bottles, microwave lunch boxes. With a melting point of 167°C, it is the only plastic box that can be placed in a microwave oven and can be reused after careful cleaning. It should be noted that some microwave lunch boxes, the box body is made of No. 5 PP, but the lid is not made of No. 5 PP, so it cannot be put into the microwave together with the box body. To be safe, remove the lid of the container before putting it in the microwave.

 

Meaning of number 6, PS

The number 6 in the triangle at the bottom of the plastic bottle: PS polystyrene, commonly used for bowls of instant noodle boxes and fast food boxes. Do not put it in a microwave oven to avoid the release of chemicals due to high temperature. After loading acids (such as orange juice) and alkaline substances, carcinogens will be decomposed. Avoid using fast food boxes to pack hot food. Don’t use the microwave to cook instant noodles in a bowl.

 

Meaning of number 7, PC

The number 7 in the triangle at the bottom of the plastic bottle: PC or other types, commonly used for water bottles, space cups, and baby bottles.It is easy to release the toxic substance bisphenol A, which is harmful to the human body. The water bottle marked with 7 must see whether there is a mark of BPA free (BPA free). Generally, merchants will mark it as a selling point. Found on the body or bottom of the bottle. Do not heat it when using it, and do not expose it to direct sunlight. The common drinking water plastic bottles on the market have been tested by the state and can be used safely.

In summary,  Consumers should try to avoid repeated use of aging and easily deteriorated plastic utensils, and it is best not to reuse beverage bottles for multiple times, otherwise bacteria will easily breed and there will be health risks. Canvard Packaging Factory reminds consumers that when using plastic containers, they must read the numbers marked in the triangle at the bottom of the bottle. Only when they understand the properties of the materials can they be used in a suitable environment. What is especially important is that Plastic waste is returned to the furnace and recycled products.

Created by Canvard Packaging International Co.,Ltd

Website: http://www.canvardpackaging.com

Email: info@canvardpackaging.com

A few things you need to know before buying plastic packaging

A few things you need to know before buying plastic packaging

Some people may be new to the cosmetics industry, so they do n’t know much about cosmetics packaging, leading to hesitation in choosing cosmetics packaging, or even choosing a wrong packaging.

Below I will briefly analyze a few things you need to know before buying plastic packaging.

First, you need to understand the material of plastic packaging bottles, because different materials have different properties. For example, if you want your product to be in a plastic bottle, it can be directly seen by consumers. At this time, we recommend that you choose a plastic bottle made of PET, because the PET material itself is highly transparent, and the price is relatively cheaper than acrylic and PS material. You cannot choose PP or PE bottle, because the PP and PE materials themselves are not completely transparent, and consumers cannot clearly see the contents of the plastic bottles.

Second, you need to know what you want to contain in a plastic bottle? If you buy plastic bottles for lotions, you can choose bottles with lotion pump heads. If your product positioning is high-end, you can choose airless pump bottles and acrylic bottles to highlight your product quality. But if you want to fill facial cleanser or skin care lotion, you can choose a small and easy-to-carry plastic soft tube package, because the tube only needs to be squeezed lightly, and the price is very affordable. Or if you want to pack a very sticky cream-like product, we recommend that you buy a cream jar, because cream jars are generally filled with high consistency products, which is convenient and cheap. If it is a foam product, we recommend you to buy a foam bottle.

Third, the compatibility of product contents. Some cosmetic ingredients cannot be exposed to light to prevent volatilization. This is why you need to buy non-transparent and highly protective plastic bottles, such as airless pump bottles and acrylic bottles. Or, if your skin care ingredients are corrosive, you should use some materials with strong barrier properties. The so-called barrier plastic bottle refers to the use of a special processing technology (or combined with a special material at the same time), so that this kind of plastic bottle has the function of effectively blocking the penetration of organic solvents in emulsifiable concentrate pesticides, while retaining the plastic bottle itself is a special plastic bottle with excellent properties such as light weight, many variations (various shapes), and non-fragility.

By Canvard Packaging Factory

http://www.canvardpackaging.com

Why is the bottom of the plastic bottle recessed

The bottom of the plastic bottle is recessed to allow the beverage bottle to stand firmer. If it is a flat-bottomed plastic bottle, it is easily deformed due to the hydraulic pressure, and it usually protrudes outward, so that the beverage bottle is not stable. However, if the bottom is designed in the shape of a groove, the stress area of ​​the bottom is increased, and the pressure is reduced, so that it is not easy to deform. And even if the entire bottom does not touch the table, as long as the force is uniform, it can stand very stably. The stability of the five-claw shape is very good, so a large part of the common plastic bottles are made into a five-claw shape. Plastic bottles are usually only disposable. If you use it to hold hot water, you will notice that it will deform and either bulge or shrink. In addition to becoming strangely shaped and difficult to stand, plastic products also release toxic substances at high temperatures.

Material introduction of cosmetic aluminum-plastic tube

Material introduction of cosmetic aluminum-plastic tube

There are five main materials for cosmetic aluminum-plastic tubes: ordinary silver sheets, ordinary white sheets, high-gloss sheets (also called high-bright sheets), all-plastic transparent sheets, and fully-shaped white sheets. The five kinds of sheets have their own characteristics. The biggest difference is that the printing effect is different. The common point is that the printing effect is very realistic.

In addition, each material has different thicknesses. The most commonly used thickness specifications for cosmetic packaging are: 250μm, 270μm, 300μm, 330μm, 350μm, 400μm, and materials exceeding 400μm. The production process is very demanding, many manufacturers cannot make it. 350μm materials are commonly found in high-end cosmetic packaging, such as facial cleanser, sunscreen, etc. Sheets below 300 μm are generally found in hand cream tubes, toothpaste tubes, and the like.

What is the difference between a blow molding process and an injection molding process?

The blow molding products are all hollow; because of the injection molding port, the molded product will have a small and unnecessary part, and there will be a process to cut it off, but if you look carefully, you can still find it; Injection molding is a method in which a thermoplastic or thermosetting molding compound is first uniformly plasticized in a heating cylinder and then pushed by a plunger or a moving screw into a cavity of a closed mold.

Injection molding is suitable for most of thermoplastics. In recent years, injection molding has also been successfully used to form certain thermoset plastics. Injection molding has a short molding cycle, and the quality of molded products can range from a few grams to several tens of kilograms. It can form molded articles with complex shapes and precise dimensions with metal or non-metal inserts at one time. Therefore, the method is highly adaptable and has high production efficiency.

Blow molding: A method in which a hot parison closed in a mold is inflated into a hollow article by gas pressure, or a tubular parison is inflated into a tubular film. This method is mainly used in the manufacture of various packaging containers and tubular membranes.

IMelt blown index of 0.04~1.12 is a relatively good hollow blow molding material, such as polyethylene, polyvinyl chloride, polypropylene, polystyrene, thermoplastic polyester, polycarbonate, polyamide, cellulose acetate and poly An acetal resin or the like in which polyethylene is most used.

Injection Blow Molding: The plastic is first made into a bottomed parison by injection molding, and then the parison is moved into a blow mold to be blown into a hollow product.

Extrusion blow molding: The plastic is first made into a bottomed parison by extrusion, and then the parison is moved into a blow mold to be blown into a hollow product.

Stretch blow molding: Stretch blow molding is a blow molding of biaxially oriented stretching by first stretching the form longitudinally and then inflating with compressed air to achieve transverse stretching. Stretch blow molding can greatly improve the transparency, impact strength, surface hardness and rigidity of the product, and is suitable for blow molding of polypropylene and polyethylene terephthalate.

Blown film method: A method of forming a thermoplastic film. The plastic is first extruded into a tube by extrusion, and then continuously expanded to a tubular film of a certain size by air blown into the tube, and then folded and wound into a double-layer flat film after cooling.

From Canvard packaging factory

Cosmetic packaging manufacturer

http://www.canvardpackaging.com